www.traxontechnologies.com | www.osram.us/traxon
©2022 TRAXON TECHNOLOGIES - AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, OTHER PATENTS
PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Installation Guide
01/22 V1.0
11 of 20
3.2.4
Installation Sequence
1. Plan for any possible bending of cables (refer to “3.2.3 Requirements Of Cable Bending And Twisting” on
page 10 as well as Fig. 11 on page 14.).
2. Always keep the End Cap Resistor safe in a container for reuse.
3. Connect ARCHISHAPE
®
2.0 Dot S/M/L with system components and LED Engines as outlined within this
guide. See section 4 for System Diagrams.
4. Perform functional check on all ARCHISHAPE
®
2.0 Dot S/M/L and inspect cables for any damage. Check for
any abnormalities with the signal.
5. Report any functional defect found to your nearest Traxon Technologies office. DO NOT attempt to install
ARCHISHAPE
®
2.0 Dot S/M/L with functional defects on-site.