6
6
ASSEMBLY INSTRUCTIONS
Take caution when handling light bars. Ensure the LED array
does not come in contact with sharp objects or force that may
damage the diodes.
Unbox and unfold module and place on flush, stable surface .
Ensure the quick-release mechanism on light bar clip is
positioned according to diagram before sliding into place . The
spring tab will lock light bar into place when properly centered .
PSE
i.
When the module is unfolded and LEDs are facing down
against the flush surface, attach Power Supply Light Bar
Brackets to the center two bars and press firmly until they
snap into place .
SAFTEY NOTE: Light Bar Brackets must be installed
only on the light bars and parallel to the ground
mounted to the light bars.
ii.
Identify the bracket lock receivers on the underside of
the power supply enclosure .
iii.
Place power supply enclosure (PSE) on top of brackets,
aligning the bracket mounts with the bracket receivers .
1
2
