www.osram.com
Customization project version 1.0 Tue 2/11/2020 HL
DALI PRO 2 IoT
“Remote Access”
Quick Start Guide
Please read this guide in full before using our Remote Access service!
Table of Contents
Introduction
page 01
Web Application Remote Access
page 02
Enable Remote Access Feature
page 04
Activate Remote Access Service
page 05
Download File
page 07
Change File
page 07
Upload File
page 09
Summary
page 11
Glossary
page 11
Introduction
Remote Access
is all about making adaptations to a Lighting System without the need to visit the site.
Adaptations are made by changing the configuration file as stored onto the controller.
In general, the configuration file is created during commissioning while being on-site.
To make adaptations to this configuration while not physically on-site, you can use our
OSRAM Web Application Remote Access to change the configuration file from remote.
The Web Application Remote Access allows you to download the configuration file from the
controller, make changes via the PC TOOL and then upload the file back onto the controller.
