Osram 58289 Скачать руководство пользователя страница 2

Overview 

The OSRAM Tunable White Wallstation provides quick and accurate color 
temperature and brightness control when used in conjunction with an OSRAM 
Tunable White LED Driver (58287). The wallstation also provides freedom to adjust 
the color temperature of the light engine in the range of 2700K to 6500K. It comes 
with three preset scenes which are user programmable. User can control the room 
ambiance using these preset buttons. Instructions to program the preset scenes 
can be found on page 8 of this manual. It is powered by the DALI power pack 
(58290).

Important Safeguards 

Note

Tip

!

STOP

When using electrical equipment, basic safety precautions should always 
be followed including the following:

 

READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 

 

Do not mount near gas or electric heaters. 

 

Equipment should be mounted in locations and at heights where it will not 
readily be subjected to tampering by unauthorized personnel.

 

The use of accessory equipment is not recommended by OSRAM as it may 
cause an unsafe condition.

 

Do not use this equipment for other than the intended use.

Note

Tip

!

STOP

SAVE THESE INSTRUCTIONS

Wallstation 

 

NAED 

Ordering Code

58289 TW-Wall-Station

2

Содержание 58289










Отзывы: