OspreyFrank SteamForce SF 20, Руководство по эксплуатации

Страница: 45 / 60

45
UK
The sig nal lamp (1-F ig.8) on the control
panel indicates correct machine feeding.
Turn on the general switch for pumpheater
feeding (3 Fig.8): the temperature display
(4 Fig.8) will blink for about 4-5 seconds
and will t hen st abilize in dicating the
internal boiler temperature. Low water level
in the tank is indicated by the no-water
signal lamp (2) and an acoustic signal. The
signal lamp (2 Fig .8) will turn on for 2 about
seconds and then will turn off.
The machine is ready to deliver steam when
a temper ature of around 180°C is shown
on the display (4, Fig. 8) and a pressure of
abo ut 10 bar is sh own on the gauge (2,
Fig. 6). When the water level in the tank is
low, the warning light (2, Fig. 4) will start
to flash and an acoustic signal will sound.
On the front of the machine is a clearly
identifiable panel below which are two
tanks, one for water and one for a mixture
of water and detergent. Turn the knob to
open the panel. Then fill them up (Fig. 9).
The two tanks are now clearly visible. The
larger one is used for tap water only . The
smaller one can be filled with a mixt ure of
water and suitable non foaming detergent
(Fig. 10).
DO NOT fi ll the water tank with any
other liquid other than clean tap
running water. The non compliance
with this note could affect the proper
operation of the generator.
Fig. 8
Fig. 9
Fig. 10