Osprey Poco LT, Руководство пользователя

Страница: 7 / 27

POCO LT
ChiLd Carrier
English 11
3. FIT AND SECURE THE CHILD
3.1 Open the Double Halo child harness by releasing
both red harness buckles located below the
child’s center back pad.
PREPARE THE CHILD COCKPIT
3.2 For proper fit, the child’s chin should be level
to the top of the drool pad at the front of the
cockpit. Place the child in the carrier to check if
adjustment is needed.
3.3 To move the seat into proper position, locate
the child’s center back pad that hides the child
harness attachment buckles from Step 3.1. Below
the back pad is a hook-and-loop attachment that
secures the child’s seat height in use.
ADJUST CHILD SEAT HEIGHT
To adjust the seat, follow these steps:
WARNING Child must not be in the carrier while adjusting seat height.
3.4 Slide a hand underneath the center back pad to
break the hook-and-loop connection.
3.6 Place child into carrier guiding each leg through
the corresponding left and right Double Halo leg
loops. Ensure proper fit by confirming the child’s
chin is level with the top of the drool pad.
3.5 Leave your hand behind the back pad to keep it
disconnected while adjusting the seat up or down
to fit the child’s size.
SECURE THE CHILD
3.7 Guide the child’s arms
through the Double Halo
harness arm loops.
3.8 Buckle the right and left
red harness male buckles
into the red female buckles
located behind the center
back pad.
3.9 Tighten to tension both right
and left straps so that the
harness is snug around the
child’s upper torso. The child
is now secure in the cockpit.