Osprey Video
59
7.
Select the
Audio Configurator
tab.
Figure 42. Audio Configurator
tab
8.
Select the audio input in the
Input 1 Connector Type
field (Figure 43).
Figure 43. Input 1 Connector Type field
9.
The
Master Clock
field should correspond to the video connectors on the back of the
card. If you change the connector on the card, you need to change the Master Clock
field as well.
10.
Click
Apply
and then
OK
.
11.
Reboot the system so your changes can take effect.
After you configure the inputs for the audio input card, any encoders that you create will
display the additional audio inputs on the Audio tab. If you configure the inputs after you
create encoders, the additional audio inputs will display on the Audio tab. However, if you
change the audio connector on the card and in Osprey Preview, you need to manually change
the audio settings on each encoder in the web interface.
