Osprey 800e Series User Guide
Osprey Video
15
Multiple board types
All Osprey video capture cards are designed to co-exist with other Osprey cards within practical
limits of slot placement, available power, and the upper limits of system and CPU performance.
There are eight classes of Osprey devices. Each class requires its own Windows driver.
class 1: o100, o200, o210, o220, o230
class 2: o300 class 3: o440 class 4:
o530, o540, o560 class 5: o700e HD
and 0710e HD
class 6: o240e, o450e class 7: o100e, o260e,
o460e class 8: o815e, o820e, o821e, o825e,
o845e
This user guide applies only to class 8.
For example, if you install an Osprey 240e and an Osprey 845e series in the same computer, you
must install separate drivers for each board.
Adding or moving boards
When you add or move boards after you install the Osprey 845e driver, the following two scenarios
exist.
A. You added a board of a different class to a computer that already contains another board. For
example, an Osprey 240e is already installed with its current driver on the computer. You want to
add an Osprey 845e card. You must install the driver installation package for the new board to
work.
B.
You moved a board from one slot to another, or added another board of the same type.
For example, an Osprey 240e card is installed in the computer, and you want to install another
Osprey 240e card. In this case, the following sequence takes place.
1.
The New Hardware Wizard runs and the Found New Hardware window appears
followed by the Digital Signature Not Found window.
2.
Click
Continue Anyway
. (The Digital Signature Not Found window will only
display on drivers that have not been WHQL certified. WHQL-certified drivers
skip this step.)
3.
The Controller Installing window appears, and the text inside this window
changes to Osprey Video Capture Device, Installing … Then the Digital Signature
Not Found window appears.
4.
Click
Continue Anyway
. (Again, the Digital Signature Not Found window will only
display on drivers that have not been WHQL-certified. WHQL-certified drivers
skip this step. The Completing the Found New Hardware window displays.
5.
Click
Finish
. The Digital Signature Not Found window appears.
6.
The Digital Signature Not Found window appears once for each Osprey board
you install.
7.
The Systems Setting Change window appears.
8.
Click
Finish
to restart the computer.
9.
The Osprey 800 series card is now ready for use.
