MET807
CHAIR w/ OTTOMAN
ASSEMBLY INSTRUCTIONS
© Office Star Products August 2012
IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Attach one Leg (2) to each bottom corner of Chair Body (1) using one Screw (3) for each Leg (2),
SEE DETAIL A.
FULLY TIGHTEN ALL SCREWS (3) USING ALLEN WRENCH (4).
ATTENTION: MAKE SURE ALL SCREWS (3) ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART QTY
1.
Chair Body . . . . . . . . . . . . . . . . . . . 1
2.
Leg . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.
Screw . . . . . . . . . . . . . . . . . . . . . . . 4
4.
Allen Wrench (not shown) . . . . . . . 1
STEP 1
1
2
3
DETAIL A
1
3
2
