IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage.
2. Carefully remove any staples used for packaging.
3. Phillips Screwdriver also needed for assembly (not provided)
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert four Shelf Pins (3) into cabinet at desired height.
STEP 2
Carefully place Shelf (2) onto Shelf Pins (3). Adjust levelers to level the cabinet.
PART (CABINET) QTY
1. Cabinet . . . . . . . . . . . . . . . . . . . . . 1
2. Shelf . . . . . . . . . . . . . . . . . . . . . . . 1
3. Shelf Pin . . . . . . . . . . . . . . . . . . . . 4
STEP 1
Attach one Bracket to rear of cabinet using one Short Screw,
FULLY TIGHTEN LONG SCREW USING PHILLIPS
SCREWDRIVER (not provided).
Drill a ¼” pilot hole into the wall and tap in Anchor, secure remaining Bracket to wall using one Long Screw.
FULLY TIGHTEN
LONG SCREW USING PHILLIPS SCREWDRIVER (not provided).
Move cabinet into desired position and align wall Bracket and cabinet Bracket. Thread
Safety Strap through wall Bracket and cabinet Bracket and tighten Safety Strap until snug.
© Office Star Products April 2015
BRM92
BRAMLEY HALL STORAGE CABINET
ANTI-TIP KIT INSTALLATION INSTRUCTIONS
BRM92
BRAMLEY HALL STORAGE CABINET
ASSEMBLY INSTRUCTIONS
1
2
3
STEP 1
STEP 2
