termo
ptv-e
termo
ptv-m
6
The
Termo PTV
is a sealed system
boiler, specifically designed to provide
heat to a wet radiator system, under
floor heating, or both and an indirect
cylinder, vented or unvented, by
means of the factory fitted twin pump
arrangement.
Supplied with the
Termo PTV-E
is a
temperature sensor which measures
the temperature of the stored water in
the cylinder. When heat is required to
the cylinder the intelligent controls
read the temperature of the cylinder
stored water and adjust the output
from the boiler using only the required
amount of energy to raise the cylinder
contents to the desired temperature.
The
Termo PTV-E
can be used in
conjunction with any standard or
programmable room thermostat and
systems incorporating thermostatic
radiator valves.
The
Termo PTV-E
and
Termo PTV-M
can be used in
conjunction with the OSO Power Cascade Limiter, see page 10.
The Termo PTV-E version boiler is supplied with inbuilt
heating curve software, outside temperature sensor and a
hot water cylinder sensor. Further information about
heating curves can be found on page 9.
Digital control panel showing heating curve settings,
air in boiler indicator and primary temperature and
pressure gauge.
