Osmo Wood Orbiter, Руководство по эксплуатации

Страница: 10 / 12

10
Edge brush (optional)
To achieve better cleaning results around the edges,
please use the edge brush set.
Mounting the edge brush
1. Tighten the guard using a plastic screw on the front at the left cover.
2. Push the hexagonal spindle with the edge brush through the shaft support parts
until you feel it engages.
Working with the edge brush
1. Work with the machine diagonally to the wall.
2. Absorb the previously removed dirt with the return brush.
Only use the edge brush on surfaces where surrounding walls have been protected,
risk of dirt being dispersed / sprayed on the wall.
Cleaning the Orbiter
1. Push the right, red button down into the transport position.
2. Remove the plug from the socket and secure the cable over/around the 4 intended holders.
3. Empty the dirty water tank and then rinse it.
4. To avoid the nozzles becoming clogged it is recommended to remove the cleaning agent
or water from the fresh water tank whilst the machine is not in use.
5. Remove the floating axle from the Orbiter and clean the brushes.