OSKITONE OKAY 2 Synth, Инструкция по сборке

Страница: 31 / 38

d. For the OKAY 2, screw SPST_VR boards into key
cradle and secure with hex nut on cradle
underside.
2. Keys ​ (for OKAY 2)
a. The keys have matching screw holes for the top
row of the key cradle. Secure each together
with a screw and nut.
3. Speaker and grill
a.
Temporarily unsolder the speaker
b. Thread its wire through the speaker hole
c. Resolder speaker
d. Place speaker in hole and cover with grill
e. Mount grill to enclosure top with 4 screws and 4
hex nuts
4. Controls
a. Insert control labels (the piece with “OCT” and
“VOL” text) into its spot on enclosure top. If the
fit is too tight, carefully trim away excess plastic
from the enclosure with a utility knife.
b. Insert LED into its hole on the “VOL” label
c. The octave selector rotary switch and volume
potentiometer may have tabs that protrude
parallel to the shafts. These are designed to
hold the component in place. We won’t be using
them; bend or break them off with pliers
d. Insert the octave selector rotary switch and
volume potentiometer. Tighten the volume pot
but leave the switch loose
e. Place the knob with a tension screw in its side
onto the volume potentiometer, and gently
tighten its screw until it holds
f. Place the other knob on the rotary switch. Note
that the switch’s shaft has ridges (called
“knurls”) that make the knob push on better at
certain angles