OSKA HCP012, Руководство пользователя

Страница: 13 / 24

13
Only use an AC power adapter certified to either UL60950, IEC60950-1,
IEC60335-2-29, or IEC60601-1, with an output marked Class 2 or meeting
limited power source (LPS) requirements, not to exceed 16V. Contact Oska, Inc.
or your local Oska distributor for a replacement.
When the device is connected to a power source, LED lights located at the opposite end
of the charging port will illuminate. If the battery is fully depleted the LEDs may take a few
minutes to illuminate. The LEDs will remain lit (not pulse) until the device is fully charged,
then will turn out. It may take up to three (3) hours for the battery to reach a full charge.
A fully charged battery can provide five (5) or more 3-hour sessions. Battery charge time
may vary by environmental conditions and use patterns. Battery life may decline following
extended use. The battery is not user replaceable.