OSI Systems Rapiscan Metor 6E, Краткое руководство по установке

Страница: 9 / 16

Page 8 Metor 6E P/N 92109435
Installation Quick Guide Rev. 2
3 INSTALLATION
3.1 Mechanical Assembly
The items needed in mechanical assembly
are packed in the box containing the cross
piece.
For checking the distance of the coil panels
there is a pasteboard gauge in the cross
piece box.
Ref Part Pcs
1 ............ Panel 1 (MTRP 5266)..... 1
2 ............ Panel 2 (MTRP 5267)..... 1
3 ............ Cross piece..................... 1
5 ............ Mounting screws............. 8
Washers ......................... 8
Allen
key ......................... 1
The following parts illustrated in pictures are
integrated into coil panels or cross piece,
but they must be considered in assembly:
Ref Part Pcs
4 ............ Display and keypad ........ 1
6 ............ Zone displays ................. 2
(one in each coil panel)
7 ............ Traffic lights .................... 1
Assembly:

First define the sides of the coil panels
if you have side-by-side operation.

Zone displays are assembled at factory
so that they are towards exit side when
panel 2 is on left side and panel 1 on
right side. Position of the displays is
also shown by stickers on the panels.

Lay the coil panels on the floor.

Install the cross piece with display and
keypad towards the exit side.

Place the cross piece to the holes in the
coil panel and fasten using the
mounting screws and washers.

Repeat with the other panel.

Do the final tightening of the screws
after lifting the unit to ensure that the
panels are parallel.
Rapiscan Systems Proprietary Information