Oshkosh IMT Tirehand TH10K135, Руководство пользователя

Страница: 54 / 110

52 TH10K135 Manual #99905540
Tirehand Parts Ordering Information
GENERAL
This section contains the exploded parts drawings, with accompanying parts lists, for the
assemblies used on the Tirehand. These drawings are intended to be used for ordering parts
only.
CYLINDER IDENTIFICATION
To ensure proper replacement parts are received, it is
necessary to specify the complete number/letter sequence
for any part request. You must include the part number
stamped on the cylinder case when ordering parts.
WELDMENT IDENTIFICATION
Each of the major weldments on the tirehand bears a stamped part number. Any time a major
weldment is replaced, you must specify the complete part number as stamped on the weldment.
The locations of the part numbers are as shown below.
ORDERING REPAIR PARTS
When ordering replacement
parts:
1 Give the model number of the
unit.
2 Give the serial number of the
unit.
3 Specify the complete part
number. When ordering
cylinder parts, or one of the
main weldments, always give
the stamped part number.
4 Give a complete description
of the part.
5 Specify the quantity required.
Fallback
Arm
Arm
Body
Hand
Pad
Fallback
Arm
Pad
Hand
Arm
Forklift-style
Base*
*Forklift-style base shown.
Courtesy of Crane.Market