Oshkosh Corporation JLG H800AJ, Руководство по эксплуатации и безопасности

Страница: 73 / 164

SECTION 4 - MACHINE OPERATION
3121769 – JLG Lift –
4-1
SECTION 4. MACHINE OPERATION
4.1 DESCRIPTION
This machine is a mobile elevating work platform used to posi -
tion personnel, along with their necessary tools and materials at
work locations.
The primary operator control station is in the platform. From this
control console, the operator can drive and steer the machine in
both forward and reverse directions. The operator can raise or
lower the boom or swing the boom to the left or right. Standard
boom swing is 360 degree continuous rotation. The machine has
a Ground Control Console which will override the Platform Con
-
trol Console. Ground Controls operate all functions except drive
and steer and are to be used in an emergency to lower the plat
-
form to the ground should the operator in the platform be
unable to do so.
4.2 BOOM OPERATING CHARACTERISTICS AND
LIMITATIONS
Capacities
Raising boom above horizontal with or without any load in plat -
form, is based on the following criteria:
1.
Machine is positioned on a smooth, firm, and level surface.
2.
Load is within manufacturer’s rated capacity.
3. All machine systems are functioning properly.
4.
Machine is as originally equipped from JLG
Stability
Machine stability is based on two positions which are called FOR -
WARD STABILITY and BACKWARD STABILITY. The machine posi -
tion of least forward stability is shown in Figure 4-1. and its
positions of least backward stability is shown in Figure 4-2. and
Figure 4-3.
TO AVOID FORWARD OR BACKWARD TIPPING, DO NOT OVERLOAD MACHINE OR OPER -
ATE ON AN OUT-OF-LEVEL SURFACE.