SECTION 4 - EMERGENCY PROCEDURES
31217156
4-3
Platform Caught Overhead
If the platform becomes jammed or snagged in overhead struc
-
tures or equipment, do the following:
1.
Shut off the machine.
2.
Rescue all people in the platform before freeing the machine.
Personnel must be out of the platform before operating any
controls on the machine.
3.
Use cranes, forklifts or other equipment to stabilize motion of
the machine to prevent a tip over as required.
4.
From the ground controls, carefully free the platform from the
object.
5.
Once clear, restart the machine and return the platform to a
safe position.
6.
Inspect the machine for damage. If the machine is damaged or
does not operate properly, turn off the machine immediately.
Report the problem to the proper maintenance personnel. Do
not operate the machine until it is declared safe for operation.
Righting of Tipped Machine
A forktruck of suitable capacity or equivalent equipment should be
placed under the elevated side of the chassis, with a crane or other
suitable lifting equipment used to lift the platform while the chas
-
sis is lowered by the forklift or other equipment.
Post-Incident Inspection
Following any incident, thoroughly inspect the machine and test
all functions first from the ground controls, then from the platform
controls. Do not lift above 10 feet (3 meters) until you are secure
that all damage has been repaired, if required, and that all controls
are operating correctly.
To
order go
to
Discount-Equipment.com
