SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31217156
3-9
Platform Controls
NOTICE
CONTROL BOXES SHOULD NOT BE SWITCHED FROM ONE MACHINE TO ANOTHER.
1. Forward/Reverse/Lift/Lower Direction Arrow -
This arrow
indicates the direction the joystick must be moved to oper
-
ate machine functions. Notice the black and white ends of
the arrow in relation to the control indicators.
2. Joystick Controller with Trigger Enable Switch -
The joy
-
stick controller controls four functions: drive, lift, leveling
jacks, and steer. The drive, lift, or leveling jacks function
switch must be selected and the trigger switch on the front
of the control handle must be depressed and held prior to
moving the control handle and during controller movement.
After selecting the drive function, depressing the trigger
switch and moving the control handle forward will drive
the machine forward and moving the control handle back
-
wards will drive the machine backward.
After selecting the lift function, depressing the trigger
switch and moving the control handle forward will lower
the platform and moving the control handle backward will
lift the platform up.
After selecting the leveling jack function, depressing the
trigger switch and moving the control handle forward will
extend all four leveling jacks. Moving the hand controller
backward will retract the leveling jacks.
The speed on all selected functions, except leveling jacks, is
proportionally controlled by the distance of travel of the
hand controller.
NOTE:
If the machine is also equipped with a footswitch (Korean Speci
-
fication only), the footswitch must be depressed in conjunction
with the trigger (enable) switch located on the controller. Power
is removed from the platform controls when the footswitch is
released.
To
order
go
to
Discount-Equipment.com
