Oshion MD-A1, Руководство пользователя

Страница: 7 / 12

B.OUTDOOR TESTING AND USE
1. Rotate the volume switch away from OFF to power on the detector.
2. Follow the instructions described in OPERATION to set the
SENSITIVITY,VOLUME,DISC,NOTCH and operation mode.
3. Find an area on the ground outside where there is no metal.
4. Place a sample of the material you want the detector to find (such
as a gold ring or a coin) on the ground.
Note:
If you are using valuable metal such as gold to test the detector, mark
the area where you place the item, to help you find it later. Do not
place it in tall grass or weeds).
5. Hold the search coil level to the ground about 1~2 inches above
the surface, slowly move the search coil over the area where you
placed the sample, sweeping the search coil in a side-to-side motion.
Search coil Sweeping Hints:
Never sweep the search coil as if it were a pendulum. Raising the
search coil while sweeping or at the end of a sweep will cause
false readings.
Sweep slowly, hurrying will cause you to miss targets.
It’s better you sweep the search coil from side to side in an arc
line of 3 inches motion and keep the search coil parallel with the
ground.
6