PC-30 Filter control unit operating manual Page: 8
4.
You can now use the and keys to set the hours.
5.
Press the key
⇒
the weekday display blinks.
6.
You can now use the and keys to set the weekday.
Press the key again to save the time. If no key is pressed for more than
10 seconds during setting, the last time displayed is saved automatically
and the normal operating display will be shown again.
Programming the timer
Use the key to program the built-in timer, whereby the switch-on time and
the associated switch-off time must always be entered as pairs.
1.
Press the key
⇒
the display shows
-----
1.
, if no switching time
has yet been programmed.
2.
If you press one of the or keys, or if a switching time has already
been programmed, the display shows
0:00
0:00
1.
, the minute display of
the top time (switch-on time) blinks. Note: if you press the key, the
current time will be taken over.
3.
You can now use the and keys to set the required switch-on time
minutes.
4.
Press the key again
⇒
the hours in the switch-on time blink
5.
You can now use the and keys to set the required switch-on time
hours.
6.
Press the key again
⇒
the minutes in the switch-off time blink
7.
You can now use the and keys to set the required switch-off time
minutes. Note: if you press the key, the current time can be taken over,
if you press the and keys simultaneously the switch-on time set
previously will be taken over.
8.
Press the key again
⇒
the hours in the switch-off time blink
9.
You can now use the and keys to set the required switch-off time
hours.
10.Further switching times can now be programmed as in points 1-9.
11.
Press the key again to save the switching time. If no key is pressed
for more than 10 seconds during setting, the last switching time
displayed is saved automatically and the normal operating display will be
shown again.
If switching times have already been programmed, you can use the key
to delete them.
1.
Press the key as often as required until the switching time to be
deleted is displayed
10:00
16:00
3.
2.
The switching time is deleted if you press the and keys
simultaneously.
.
