oset 20 Light, Руководство пользователя

Страница: 33 / 40

33
SETTING UP YOUR OSET FOR RIDING:
1. Set the speed dial to the correct level for the rider. Low for non-
experts and all riders under 10 years old.
ALWAYS CHECK BEFORE RIDING.
2.
Set the ‘response’ dial to the correct level for the rider.
Low for all non-
experts and all riders under 10 years old. ANTICLOCKWISE for low.
CLOCKWISE for high.
3.
Set the ‘power’ dial to the correct lever for the rider.
Low for non-
experts and all riders under 10 years old.
a. Ensure everyone is clear of the bike.
b. Place the bike on a stand or block, so both wheels are above
the ground.
c. Switch the bike on.
d. Set
the ‘speed’ switch/button to low. Set to high for
experienced/advanced riders over 10 years old ONLY.
Turn the power dial in very small increments to the desired setting. ALWAYS
start the rider on the slowest settings!
4. Check the tires are inflated to between 20 and 40 psi. Lighter riders can
run lower pressures.
5. Check the chain for tightness and lubrication.
6. Set the controls correctly for the rider.
a. With the wheels on the ground, sit the rider on the bike.
b. Adjust the lever positions so they are easy to reach, and check
that the brakes are functioning correctly, and at the desired
level.
Adjust the ‘reach’ of the levers to suit the rider. See page
23.
WARNING!
Improper set-up is dangerous! It is your responsibility to set the machine to the
ability of the rider. Failure to do so could result in serious injury or death, and
damage to the machine.