oset 20 Light, Руководство пользователя

Страница: 17 / 40

17
WARNING!
The power must be switched to the off position before attaching and plugging in
the charger.
SWITCHES, DIALS & INDICATORS:
The key switch is located on top of the tank, in front of the rubber bung. The
charge port can be found on the left side of the frame next to the steerer tube.
Key Switch: A
The key switch turns the power on
and off. When the rider is sitting on
the bike, this is located in front of
them above the rubber tank bung,
at the front. The key is removable,
and should be removed when the
bike is not in use.
Charger Port:
B
When it’s time to recharge the bike,
the battery charger connector
attaches to this port. Before
attaching, ensure that the power is
switched to the off position. Please
refer to the battery and charging
section (page 26) of this manual for
more information.
Handlebar switch:
This switch is in addition to the key
switch and provides extra
functionality. The key switch MUST be in
the
‘on’ position for the handlebar switch
to operate. With the key switch in the ‘on’
position, the handlebar switch can be
used to turn the bike on and off. The
responsible adult can remove the key
when the bike is not in use.
3 Dial Adjustment:
Speed dial: A
The speed dial is located underneath the
rubber bung for convenience. This must
be altered/changed by a responsible
adult only. When dial is turned to the fully
clockwise position, the bike will have a
maximum speed, When in the anti-
clockwise position the speed will be
reduced to
it’s minimum.
A
B
A
C
B