15
SWITCHES
The key switch turns the power on and off.
When the rider is sitting on the bike, this is
located in front of them above the seat cover.
The key is removable and should be removed
when the bike is not in use.
KEY SWITCH
This switch is in addition to the key switch and
provides extra functionality. The key switch
MUST be in the ‘on’ position for the magnetic kill
switch to operate.
With the key switch in the ‘on’ position, the kill
switch can be used to turn the bike on and off,
simply by connecting the red magnetic cap to
the black base on the handlebar.
As a safety precaution, if the throttle is applied
before the kill switch is connected, the bike will
not move.
Always ensure the rider is wearing the kill switch
around their wrist and that the cord is tightened
firmly.
Please note, the magnetic kill switch is fitted as
standard on the 20.0 Racing. The 20.0 Eco model
has a conventional on/off handlebar switch.
KILL SWITCH
The power must be switched to the off position before attaching and
plugging in the charger.
WARNING!
Failure to properly install the batteries may result in an accident resulting in death, serious
injury and/or property damage. If you are uncertain about any aspect of the assembly and
adjustment of your bike, seek help from a qualified mechanic or the OSET Customer
Service Department.
WARNING!
16
DIALS & INDICATORS
The speed dial is located underneath the rubber bung
for convenience. This must only be changed by a
responsible adult. When dial is turned to the fully
clockwise position, the bike will have a maximum
speed, when in the anti
-
clockwise position the speed
will be reduced to its minimum.
DIAL ADJUSTMENT
The battery charge indicator is located on the throttle
assembly and shows the state of the batteries. The
indicator lights can be checked at any time to
determine if the main power is off or on. Always turn
the power off and remove the key when the bike is
not in use.
It must be treated very carefully as the range of
adjustability is enormous.
THIS DIAL IS TO BE ADJUSTED BY A RESPONSIBLE
ADULT ONLY.
The function of this dial is to adjust the ‘response’ of
the bike. Fully anti
-
clockwise will give the slowest
throttle response. Fully clockwise will give the
quickest response.
CHARGE INDICATOR
SPEED DIAL
This is the most important adjustability feature on the
bike and must ALWAYS start with the lowest setting,
and make changes in very small increments. It may
appear that the highest power will be suitable for an
advanced rider, but it must be understood that there
is a lot of power available.
It is a great feature to have such a range available, but
it MUST be treated with respect. ALWAYS adjust from
lower to higher, in very small increments.
POWER DIAL
THROTTLE RESPONSE DIAL