29
MAINTENANCE, CLEANING & STORAGE
Keep your OSET clean and dry. Clean using the recommended procedure
(see below).
Check all components for tightness and adjustment, including handlebars, levers,
axles, chain, brakes.
Check the wheel spokes for tightness. It is normal for spokes to loosen in operation.
PLEASE CHECK after every initial ride, and then regularly afterwards. If you need
guidance please consult a skilled wheel builder or call OSET customer service.
Check the speed, power and response setting before each ride.
Check the tires for proper inflation. Also, inspect the tires for damage.
CLEANING
Cleaning and maintaining your OSET correctly will provide a more enjoyable ownership and
riding experience. By hand cleaning the bike, you can simultaneously inspect all of the
components. We recommend cleaning be done with a damp cloth and slow running water.
Care must be taken when washing. This is an electric machine and water should never
reach sensitive components. If a hose is used, cover sensitive parts.
Never use a power washer as it may cause irreparable damage to sensitive components.
Water and electrical components do not mix! Do not get water onto the
controller, throttle or wiring. Failure to follow this instruction could result in
permanent damage, and could cause erratic machine behavior, leading to
possible injury or death.
WARNING!
LONG TERM STORAGE
MAINTAINING YOUR OSET
If you do not plan to use your OSET for an extended period of time (1 month or more),
remove the batteries from the bike for storage.
• Fully charge the batteries before storing.
• Fully recharge the batteries at least every 60 days of storage.
• Store the batteries in a cool (50º to 70ºF, 10º to 21ºC), dry place. Avoid direct exposure
from the sun.
If you have any questions about the batteries or their usage, please do not hesitate to
contact your local dealer or the OSET Customer Service Department.
30
ELECTRICAL DIAGNOSTIC FLOW CHART
