OSEE PRM1014, Руководство пользователя, Страница: 57 / 89

Functionality of the Main Menu
51
the IMD characters, than use
∧
(Up)
and
∨
(Down)
to select characters,
than press
ENTER
to go to next character, press
MENU
to exit editor.
 When the IMD PROTOCAL is set to be
Local
, the IMD CHARACTER can
only be modified through the control buttons(
∧
(Up)
and
∨
(Down)
), and
the IMD CHARACTER could be composed of up to 16 characters. When
the IMD PROTOCAL is set to be NETWORK, the IMD CHARACTER
should be modified through the IMD page in the network control page, and
the IMD CHARACTER could be composed of up to 16 characters or up to
12 Chinese characters. For other values of IMD PROTOCAL, the IMD
CHARACTER abides by the corresponding protocol.
The PRM1014 monitor could receive the Tally control signal from a TSL server,
and display the Tally information on PRM1014 through the LED tally and OSD
tally. We support the TSI3000 and TSL TallyMan Controller as the TSL server,
and it will be introduce how to connect with them, and how to set the IMD
parameters for various IMD protocol.
5.1.10.1 Device Connection
Follow the instructions below to connect monitor with TSL server.
1.
TSI-3000--RMM1024
Connect the TSI-3000 with RMM1024, as shown in
Figure 5.1-31
:
RMM1024
Monitor 1
RMM1024
Monitor 2
TSI-3000
SERVER
Cable1
Cable2
\\
RMM1024
Monitor n
Cable2
Figure 5.1-31 TSL Server and Display Monitor