OSEE PRM1014, Руководство пользователя, Страница: 15 / 89

PRM1014 Features
9
Chapter 4 PRM1014 Features
This chapter describes the features of PRM1014 monitor. The features of
PRM1014 monitor are as shown in Figure 4-1 after installed and powered on:
Figure 4-1 Features of PRM1014 Monitor
1.
Tally light:
this LED light is at the top center of the front panel, and you
can judge the monitor status by the color of Tally light. This tri-color
(red/green/amber) light is controlled through a RJ45 connector on the
rear panel.
2.
Status Information:
it is displayed in the top left corner of the screen,
and includes the input channel and signal format. You can define it in
DISPLAY menu.
3.
Waveform and Vector:
this is effective only for SDI signal. The
waveform and vector of the input signal are configurable in the MAIN
Menu.
4.
Area Marker:
it is used to mark different area of the image. You can set
whether to display it or not and their displaying mode in
MARKER
menu.
5.
Safe Marker:
it is used to mark different area of the image. You can set
whether to display it or not and their displaying mode in
MARKER
menu