OSEE IRS3232, Руководство пользователя

Страница: 30 / 37

Network Control
24
Type a new name for the button in the name field. For example, type
"CCTV1" as the name of SRC1 button, after modifying the renaming, click
OK button
to save the modification, the result is as shown in
Figure 6.2-10.
Figure 6.2-10 Rename the Button Name
Likewise, rename the other signal buttons as you wish.

The value of
Protect
must be set as
Disable
when you switch the signal
source for an output destination in REMOTER page, otherwise, you can't
make it successfully, but the rename operation is without this limitation.
6.3
Example
For example: there is a complex system with one remote control panel and two
routers, use the LEVEL1 and the LEVEL2 button of the remote control panel to
control these routers.Set the device settings as shown in Table 6.3-1:
Table 6.3-1 The Settings Information to the Devices
Type Name IP Address Level
Remote Control Panel OSEE-Panel-0001 192.168.1.7 --
Router OSEE-Router-0000 192.168.1.86 LEVEL1
Router OSEE-Router-0001 192.168.1.87 LEVEL2
Use the network control page to set the information. The Level setting is shown
as in Figure 6.3-1: