13. Unplug the apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to
dripping or splashing and that objects filled with liquids, such as vases,
shall not be placed on apparatus.
16. WARNING: The mains plug/appliance coupler is used as disconnect device,
the disconnect device shall remain readily operable.
17. This equipment is a Class II or double insulated electrical appliance. It
is designed in such a way that it does not require a safety connection
to electrical earth.
18.
- This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
- Warning: to reduce the risk of electric shock, do not remove cover (or back) as
there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance instructions in the
literature accompanying the appliance.
XMP300
OWNER’S MANUAL
2
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO
USER SE R VICABLE P A R TS INSIDE. REFER SE R VICING TO QUALIFIED PERSONNEL!
IMPOR T ANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. The ventilation should not be impeded
by covering the ventilation openings with items such as newspaper, table-
cloths, curtains etc. Install in accordance with the manufacturer’s instructions.
8. Do not install near heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat. No open flame
sources, such as lighted candles, should be placed on the apparatus.
9. Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
MAGNETIC FIELD: !!CAUTION!! Do not locate sensitive high-gain equipment such as p r eamplifiers or tape decks di r ectly above or below the unit. Because
this amplifier has a high power densit y , it has a st r ong magnetic field, which can induce hum into unshielded devices that a r e located nearb y . The field is
st r ongest just above and below the unit. If an equipment rack is used, we r ecommend locating the amplifier(s) in the bottom of the rack and the p r eamplifier
or other sensitive equipment at the top.
EXPLAN A TION OF
SAFETY SYMBOLS
The exclamation point within an equ i lateral triangle is intended to alert the user of the p r esence of important
operating and maintenance (servicing) instructions in the literatur e accompanying the appliance.
The lightning flash with the ar r owhead symbol within an equilateral triangle is intended to alert the user to the
p r esence of uninsulated “dange r ous voltage” within the p r oducts’ enclosu r e that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point of exit from the apparatus.
11. Only use attacheements/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• W ARNING: T O PREVEN T FIRE OR SHOCK HAZARD, DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. THE AP P AR A TUS SHAL L NO T
BE EXPOSED T O DRIPPING OR SPLASHING AND TH A T OBJECTS FILLED WITH LIQUIDS, SUCH AS V ASES, SHAL L NO T BE PLACED
ON AP P AR A TUS .
• WARNING: TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FUL L Y INSE R TED T O PREVEN T BLADE EXPOSURE .
• W ARNING: THE MAINS PLUG IS USED AS DISCONNEC T DEVICE. THE DISCONNEC T DEVICE SHAL L REMAIN READI L Y AV AILABLE .
• W ARNING: ON L Y USE A T T ACHMENTS OR ACCESSORIES SPECIFIED OR PROVIDED B Y THE MANU F ACTURER .
775 Columbia St.,Brea. CA 92821
