Osby Parca 7700130-01-31, Инструкция по установке и эксплуатации

Страница: 47 / 52

47
EL 160 Eco & EL 500 Eco
10.19 Alarm messages
In the event of a system alarm or fault, the alarm icon will
flash red. When the icon is pressed, the alarm menu will be
displayed along with a message describing the alarm, e.g.
E01 Primary flow sensor. If several alarms are active, they
will be displayed sequentially. A persisting fault must first
be rectified before it can be reset. Some alarms are reset
automatically if the fault ceases. Press the Info button for a
description of the alarm and to reset.
This menu explains why the alarm was activated and how
it can be reset. The system is able to display a total of 18
alarm messages (8 at a time).
Alarm messages
E00 Relay board memory error
E01 Boiler temp sensor
E02 High cabinet temperature
E03 Cabinet overheated
E05 Outdoor temp sensor
E06 External control signal deviation
E07 Safety circuit tripped
E08 Boiler temperature too high
E09 Communication error relay board
E10 Communication error BMS.
E11 Phase L1 Missing
E12 Phase L2 Missing
E13 Phase L3 Missing
E14 USB error
E15 Room sensor
E16 System temp sensor from boiler
E17 Temp sensor from exchanger
E18 Temp sensor to exchanger
With a closed potential-free contact from overall systems or
other external circuits, the boiler can be started or stopped
provided the safety circuit conditions are met. When the
circuit is broken the boiler quickly downshifts and enters
OFF mode. When the circuit is closed again, the boiler first
enters STANDBY mode and then, once the step duration
permits, ON mode.
10.20 External power
Alarm
E10 Communication error BMS.
Verify that parent system sends.
Check the interface indication.
E10 Communication error BMS