Osby Parca 7700130-01-31, Инструкция по установке и эксплуатации

Страница: 41 / 52

41
EL 160 Eco & EL 500 Eco
Prior to start, check to ensure the
settings made have not changed
after the update.
10.10.1 Update SW from USB
10.10.2 Backup/reset settings from USB
Insert a USB flash drive into the panel's port. Then
select the Backup or Reset menu, press OK.
10.10.3 Reset highest boiler
temperature
This menu displays the highest temperature reached
by the boiler and shows a reset prompt. Pressing OK
resets the value to zero. PIN code is required to access
the menu*.
10.10.4 Reset operating time calc.
This menu displays the total number of hours the boiler
has been in operation and shows a reset prompt.
Pressing OK resets the calculator to zero. PIN code is
required to access the menu*.
10.10.5 Reset energy calculator
This menu displays the total number of produced kWh
and shows a reset prompt. Pressing OK resets the
calculator to zero. PIN code is required to access the
menu*.
10.10.6 Reset history
The menu shows a reset history prompt. Pressing OK
resets the graphs. PIN code is required to access the
menu*.
10.10.7 Service timer
Shows time remaining until the next service. The interval
length between services is set here. This function can
be deactivated after the warranty has expired.
When the control system needs to be updated,
select this option from the Service menu. Updating
is performed with a USB flash drive plugged into the
panel's port. Then press OK in the menu. The program
is written to the panel. The system will then restart. The
boiler displays the start-up screen while a system check
is done, after which the main menu will be displayed.
Boiler updating is now complete.
!
*
PIN code is sent when the warranty registration is done.
Latest version of firmware may be downloaded
via www.osbyparca.se.