Oryx SCA1200ht, Руководство по ремонту

Страница: 22 / 53

7755 S Research Dr., Suite 105, Tempe, AZ 85284
22
IX. PCB Assembly Replacement [Par # 04807-01]
A. How to Remove the PCB Assembly
1.
Remove the PCB Assembly
a)
Remove back panel ( See How to Remove the Back Panel Section III B ).
b)
Check the wires to make sure the labels are on the wires connected to the PCB.
c)
Remove all the wires connected to the PCB, be careful not to rip off a wire label.
d)
Remove the six screws that hold the PCB in place.
Figure 14 - Remove Screws and Remove PCB
e)
Grip the edge of the circuit board and carefully slide the board up and to the left. As you remove
the PCB, angle the board to clear the transformer. Make sure not to damage any wires as you
remove the board.
Figure 15 - PCB