1. Purpose
The unit is designed to transmit messages from the line telephony-connected Control Panel
(in the following formats – tone Contact ID or pulse 20bps) to Orlan CMS using wireless
3G communication channels (WCDMA 900/2100 MHz, HSDPA, HSUPA) and GSM
(850/900/1800/1900 MHz).
According to EN54-21, the unit transmits fire alarm messages and warns of malfunction.
To use mobile networks, one or two SIM cards are inserted into the unit, the data transmission
parameters of each SIM card are configured separately.
The unit has an input for the relay output of the Control Panel to transmit fire alarm
messages and an input to transmit malfunction warnings. Both the inputs are protected against the
external electromagnetic effect according to EN54-21.
Attention! The unit has no built-in cameras, microphones, devices or units for covert
video or audio recording.
2. Safety Precautions
Only the employees, familiar with the Control Panel arrangement, instructed on the safety
arrangements, and having the permit to work with electrical installations of up to 1000 V shall be
allowed to install, routinely maintain and repair the device.
Attention! The unit has no open live parts posing the electrical shock hazard.
3. Technical characteristics
Lun-9C Control Panel has the following technical characteristics (Table 1):
Table 1. Basic technical parameters of Lun-9C
Parameter name
Value
Number of SIM cards used
1 or 2
Number of own hardwired zones
3
Supported Control Panel communication protocols
•
Tone ContactID;
•
Pulse 20bps
Type of CMS message transmission system, according to DSTU EN54-21
1 and 2
Current consumption in the message mode, max, mA
700
Board current consumption in the armed mode, max, mA
100
Uninterruptive power supply voltage, V
10...14
Operational temperature range (at the non-condensing relative humidity
of 80%), °С
-5...+40
АДМА.425938.003 РЭ
Rev. en_11
3
