Genufit 25 · Genufit 27 · Genufit 29 · Genufit 30
Fully open the securing straps, pull out of the appropriate loop and release
the Velcro
®
closure from the knee brace. Pull the knee brace over the knee
so that the orange label is facing upwards (fig. A). The cut-out on the front
must lie precisely over the patella.
Genufit 25A · Genufit 27A · Genufit 29A · Genufit 30A
Open the securing straps, pull the tapes out of the appropriate loop and release
the Velcro
®
closure from the knee brace. Position the knee brace on the extended
knee in such a way that the orange label faces upwards. The cut-out on the front
should be located over the patella as precisely as possible.
Secure the Velcro
®
closures (inner one first (fig. B and C), then the outer Velcro
®
closures (fig. D and E), always start with the topmost Velcro
®
fastener).
If necessary, remove the brace, pull the joint braces out of the shaft, bend
to shape, insert back into the shaft and put the knee brace back on again.
Guide each strap through the appropriate buckle and tighten the Velcro
®
closure
until the desired tension is achieved, than secure. First close the straps at the thigh
(fig. F and G), then at the calf (fig. H). For the longer versions of the knee brace
(REF. G1127, REF. G1127A, REF. G1130 and REF. G1130A) first close the distal strap
at the thigh.
A D A P T I N G F O R T H E D O C T O R / T E C H N I C I A N
1
2
3
English
A
B
C
D
E
F
G
H
English
