WARNING
LED
Strip Lights
MODEL
SL
-RGB25M
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or
use of this product, consult a competent electrician.
INSTALLATION GUIDE
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY
A QUALIFIED
ELECTRICIAN.
1.
LED
Strip Lights
are suitable for using in
*
dry
, *damp and/or *wet
location
s
2.
Please keep the LED
Strip Lights
a
way
from any corrosive substance, and
please
use
dry
cloth
when you clean it
3.
LED
Strip Lights
can only be installed by a qualified electrician
4.
Before installation or maintenance, please disconnect the power to prevent electric shock
* Depending on your grade of protection choice, suitable location may differ
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Application Notice
1. Installation MUST be installed in accordance with applicable electrical codes by a qualified electrician
2. DO NOT turn LEDs on when still on reel. The lights MUST be pulled out
3. DO NOT secure strip lights with nails or staples
4. ONLY cut LED strip at designated cut lines
CAUTION
1.
Measure area needed for strip light installation.
Cut the LED strip to the length at the closest cut line. Peel 3M TAPE off back of the strip
2.
Press strip firmly in place with 3M tape backing.
Double confirm the wattage and length
of strip
to choose a power supply that is larger than the total
3.
Make sure
to follow wire colours from the LED strip to the RGB controller.
Ensure that the (+) and (-) wires are followed between the power supply and controller
4.
Cut as needed lengths of strip lighting off the roll. Use easy connectors as new power line by sliding
strip
under contacts on connectors and making sure contacts match solder points
as well as match colours
NOTE:
Use a 12V DC LED power supply ONLY.
12V AC will damage the controller and LEDs quickly
3
-
15
/
16
" (
10
0mm)
5/64" (2mm)
25
/
64
"
(
10
mm)
