INSTALLATION GUIDE
Fireplaces
MODEL
OFP-36LED | OFP-42LED | OFP-50LED | OFP-60LED | OFP-72LED
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Glass Particles Installation
1. To remove the outer glass around the bracket,
undo the mounting screws
(see 1, 2, 3 of the picture at the bottom)
2. Remove the outer glass
(see 4 of the picture at the bottom)
3. Adjust the screws and carefully take out the log set
(see 5, 6, 7 of the picture at the bottom)
4. Gently put the glass crystals into place
(see 8 of the picture at the bottom)
5. Be cautious about the outer glass bracket screws
(see 9 of the picture at the bottom)
OPERATION
Location
The master power switch is located on the right side of the
appliance. The control panel is on the right corner of the glass.
Master Switch
The master switch controls the power supply to the appliance. Turn
the switch to "I" to connect power and turn the switch to "O" to cut
the power. There will be a chiming sound when turning to "I".
Power ON / OFF
Touch the button once (flame will light up) to turn power ON for all functions.
Keep the last flame colour once appliance is OFF. Touch the button once more to turn all functions OFF and flame OFF.
Flame Adjustment
Touch the button to turn flame ON. There are 10 colours in total. Press this button to change colour. The display will show F1 (the orange colour),
F2 (the orange and green colours), F3 (green colour), F4 (green and blue colours), F5 (blue colour), F6 (blue and orange colours), F7 (blue, orange
and green colours), F8 (blue and red colours), F9 (red colour), F0 (all colours on loop) to change the different flame colour.
