PARTS AND HARDWARE
Fireplaces
MODEL
OFP-36LED | OFP-42LED | OFP-50LED | OFP-60LED | OFP-72LED
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Suggested Tools
•
Phillip head screw driver
•
Tape measure
•
Power drill
•
Drill bit
NOTE
•
Unit needs to be hung on wall stud for more security and stability
•
ASSEMBLY TOOL REQUIRED — Phillips Screwdriver
Parts and Hardware
Fireplace Assembly x 1
Steel Holder x1
Remote Control x1
Screw x 8
4mm (W) x 40mm (L)
Replace the faux fire log set with glass particles:
glass particles
Remove the glass pane, then replace
the faux fire log set with glass particles.
Maintenance and Cleaning
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface
with rough or abrasive objects.
Tools List
•
Drill bit
•
Drill
•
Tape measure
•
Pencil
INSTALLATION GUIDE
* Please take out the foam that is inside the unit before using the heater.
1. Remove the outer glass around the bracket, mounting screws
(see 1, 2, 3 of the picture on the right)
2. Remove the outer glass (see 4 of picture on the right)
3. Take out the foam
4. Install the outer glass to the appliance:
Lift glass panel and line up with the top bracket, fasten panel
to the appliance. Screw the brackets to appliance with
mounting screws (see 1, 2, 3 of the picture on the right)
5. Be cautious about the outer glass bracket screws
foam
36"/42"/50"/60"
72"
