FUNCTIONS
LED
High Bay Sensor
MODEL
OD
-MC628VRC
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missisauga
,
ON L5T 2N1
ON/OFF Function (stand-by period be set to "0"s)
2-step Dimming Function (stand-by period be set to "+∞"
)
3-
step Dimming Function (stand-by period be set to "
10s/1min/3min/5min/10min/30min
"
)
Daylight Priority (stand-by period set to +∞)
With sufficient ambient
light,
the light will not be
switched
on even if with
motion signal
1.
With
insufficient
ambient light, the sensor
switches on the light
when motion is detected
2
.
After elapse of hold time,
the sensor switches off
the light when no motion
is detected
3.
If there is no motion
detected, the light will be
remained at a low light
level all the time
1.
When motion is
detected, the sensor will
switch on the light to
100% brightness
2
.
After elapse of hold time,
the sensor switches dims
the light at the present
low light level if no
motion is detected
3.
With sufficient ambient
light, the light will not be
switched on even if with
motion signal
1.
W
ith insufficient
ambient light, the
sensor switches on the
light when motion is
detected
2
.
After elapse of hold time,
the sensor switches dims
the light at
a low light
level if no new motion is
detected
3.
After
elapse of standby
period, the sensor
switches off the light if no
motion is detected in the
detection zone
4
.
Lamp turns on at low
light level 10% in the
night
1.
Motion detected, lamp
automatically lights up
to 100%
2
.
After
hold time, the lamp
gradually dims to a low
light level 10% if no
movement detected
3.
Lamp turns off after dawn
4
.
