Install ceiling material to complete the ceiling construction. Then, cut around
the fan housing.
To attach the grille assembly to the fan housing, pinch the grille springs on
the sides of the grille assembly, and position the grille into the housing with
the grille springs in the appropriate slots. Push the grille assembly towards
the ceiling to secure.
WARRANTY
INSTALL GRILLE
SERVICE PARTS
PART
PART NAME
Qty.
1
2
3
4
5
6
7
8
9
10
Housing
Blower Wheel
Wire Panel / Harness Assembly
Motor
1
2
1
1
1
1
1
4
1
1
11
a
Damper / Duct Connector
1
1
Motor Plate
Grille Assembly
Grille Spring
* Blower Assembly includes part 3, 6, 7.
Replacement installation:
Remove the screw on motor plate (part 3), then take out the motor
plate (part 3) from the housing (part 9) by pushing down the rib in the
plate while pulling out on the side of the housing. Replace the broken
parts.
4
WARNING:
Before replacing, be sure to turn off power at power source.
A
1
2
3
4
6
5
7
8
8
9
10
a
11
Hanger Bars
Humidity Sensor system (for sensor model)
Wiring plate
Screw
ONE YEAR LIMITED WARRANTY from the original date of purchase against defects in material and workmanship.
This warranty is limited up to the amount of the original purchase price of the product, excluding any labor cost. For
inquiries please visit www.ortechindustries.com or call 1-888-543-6473.
