ORTEC Easy-MCS, Руководство пользователя по оборудованию

Страница: 32 / 132

Easy-MCS
™
Multichannel Scaler and MCS-32 (A73-B32) Software 931054C / 1213
22
Fig. 9. Recall (retrieve) File TUT1.MCS.
!
The main section of this dialog is a list-of-files box. One of the files in the list should be
TUT1.MCS . Click the filename to highlight it. Now notice that the sample description
you just entered, Tutorial Data , is displayed in the bottom section of the dialog.
!
Click the Open button
to load the file. The data
saved from the MCS will
appear in the full and
expanded displays.
!
This was a very round-
about way to load the MCS
data into the buffer (it was
a quick way to demonstrate
the Save Data As... and
Recall Data... commands).
The faster and more direct
way to do it is to use the
MCS > Buffer command
on the Acquire menu.
During normal operation
(as opposed to a tutorial),
you don’t have to save the data to a file unless you wish to.
4) Use the MCS > Buffer Command to transfer data from the MCS to the buffer
!
Clear the data in the buffer by clicking the Clear button just as you would do to clear the
data in the MCS.
!
Switch back to MCS mode by clicking the MCS# radio button in the lower section of the
sidebar.
!
Select MCS > Buffer from the Acquire menu.
!
Return to buffer mode by clicking the Buffer radio button. Notice that the data has been
transferred.
It’s now time to return to the MCS and do a few more acquisitions to explore the ways to abort
an MCS-32 data acquisition.