ORTAL Heat Control System, Инструкция по установке и эксплуатации, Страница: 13 / 20

13
System Setup
Figures below shows Heat Control System setup with the fireplace. Location of the heat control system components vary depending
on the fireplace series.The heat is shown in these diagrams being ducted outside, but the requirements are the same for heat being
ducted to another interior room.
Follow these recommendations(*) to achieve optimal heat removal results:

Follow the “System Setup” guidelines as shown the the proceeding diagrams (by fireplace series). Please note that the
distances in these diagrams are exact measurements and are not maximums or minimums. For example, the top of the heat
collectors should be located exactly 4 inches below the bottom of the heat release.

Frame the fireplace chase to the minimum framing values as stated in the applicable Ortal fireplace installation manual.
(*) NOTE: The bullet-pointed statements above are recommendations and are not required to follow. However, varying
from these recommendations may impact efficiency of the Heat Control System.
WARNING: To prevent heat buildup within the chase, heat release opening must not be blocked or obscured by
anything.
Series 75-90, Wilderness 31, Wilderness TR36