© Copyright Qvis ®. All documentation rights reserved.
28
2.2.2.3
Snapshot
Store a image snapshot from the camera(s) when the alarm has been triggered.
【
Channel
】
Select a channel.
【
Mode
】
Trigger: When this option is set the NVR with capture an image snapshot as
the alarm gets triggered.
【
Image Size
】
Select image size.
【
Image Quality
】
There are 6 levels of image quality to choose from.
【
Snapshot frequency
】
set the highest capture rate for a single camera channel,
choose between 1 frame and 8 frames captured.
2.2.2.4
Net Channel
This is where you can set up the IP Camera network channel.
First, open the enable switch.
【
Channel
】
Select the desired channel.
【
Protocol
】
Choose a protocol supported by the IP cameras.
【
Address IP
】
Input the IP of the IP camera.
【
Port
】
Input the port of the IP camera.
【
User name
】
Input the user name of the IP camera.
