Orolia Spectracom VelaSync 1232, Руководство пользователя

Страница: 228 / 268

4.
Using the Terminal window, you can now submit commands.
5.2.2 CLI Commands
VelaSync features a suite of command-line interface (CLI) commands that can be used to
configure parameters and retrieve status information or log files via a remote connection,
using the
telnet
or
ssh
(if enabled) protocol.
This section includes a list of some of the supported commands.
Notes:
a.
The command “
helpcli
” will provide a list of all available commands and their syn-
tax ( Note : Typing “
help
” will output bash shell help only and will not provide useful
information).
b. You can scroll up or scroll down through the output by using the Page Up/Page
down keys, or the arrow keys.
c.
Type “
q
” (lower-case) to quit.
d.
Pressing the up/down keys scrolls through previously typed commands.
e.
Commands need to be typed in all lower-case letters.
f.
Where
eth0
is the base network port and
eth1
(and higher) are used with the
optional Gigabit Ethernet module for multiple network interfaces.
g.
User accounts with “user” group permissions can perform “
get
” commands but can-
not perform any “
set
” commands or change/reset passwords. Only user accounts
with “admin” group permissions can perform “
set
” commands or change/reset pass-
word. Refer to "Adding/Deleting/Changing User Accounts" on page 177 for user
account setup information.
Command Description
clean Restores VelaSync configuration to factory defaults and reboots
cleanhalt Restores VelaSync configuration to factory defaults and halts
clearlogs Clears all logs
clearstats Clears all statistical data (NTP, and oscillator/disciplining)
dateget Displays current date (for example, 15 APR 2015)
dateset Used to set the current date
216 VelaSync 1232 User Manual
APPENDIX