Orolia Seven Solutions WR-ZEN Series, Руководство пользователя

Страница: 63 / 167

Note: CLI and Custom Preset: The steps to follow in wrz_ config
(CLI) are slightly different than in the web as it is needed to select
the Custom Preset to bring up the corresponding subset of para-
meters to the menu. If the Custom preset is not chosen in advance,
these parameters will stay hidden and thus not configurable.
Fanout ports configuration
The presets define the type of protocol selected for all the interfaces. If the user
needs a specific combination that mixes WR on some ports and PTP/IEEEE-1588
on others, he/she first select the Custom preset and then configure the Fan-out
ports.
Through Web
After applying the Custom profile under the Timing > General > Configuration tab,
the user might need to wait few seconds until the preset is completely loaded.
Then by clicking on the (+) icon of the Fanout Configuration panel, all the remaining
interfaces will be available for configuration. The user should then just change the
protocol used by a specific interface and its role (e.g, in the figure below, the wr4
port is used as PTP master).
Figure 5-6:
Mixing PTP and WR master ports (wr3 & wr4)
Through CLI
As shown in "Custom Preset with CLI tool" on the next page , the user first needs
to select the preset=Custom to reveal the Ports Configuration submenu and other
parameters.
5.2 General Timing Management
CHAPTER
5
•
WR-Z16 User Manual Rev. v3.4 53