9
Fig. 4 Connection of the keypad to the Wiegand control system
Adding an administrator
Function
Enter programming
Menu
Operation steps
Additional information
Change admin code
* Admin code #
Factory setting: 999999
00
New admin code # New admin code #
Factory setting: 999999
Set admin add card or admin add fingerprint
01
Read card / input fingerprint twice
Set admin delete card or admin delete
fingerprint
02
Read card / input fingerprint twice
Reader mode (Wiegand control system)
03
0 #
1
Access control mode (autonomous)
1 #
Relay switch mode (bistable)
2 #
PIN code
09
PIN Code # *
The PIN code can contain
4 to 6 digits.
Instructions for use
1. Adding cards
Read admin add card Read the first user card Read the second user card…. Read admin add card
Note:
The admin add card is needed to add new users continuously and quickly. When you read the administrator card for the first time, you will hear
a short "beep" sound twice and the led will light up orange. This will mean entering the programming mode. After reading the administrator card for
the second time you will hear a long "beep" sound and the led will light up red. This will mean that you will stop adding new users and exit the
programming mode.
2. Deleting cards
Read admin delete card Read the first user card Read the second user card…. Read admin delete card
Note:
The admin delete card is needed to delete users continuously and quickly. When you read the administrator card for the first time, you will hear
a short "beep" sound twice and the led will turn orange. This will mean that you will enter delete users. When you reading the administrator card for
the second time, you will hear a long beep sound and the LED will light up red. This will end the process and exit the card deletion mode.
3. Assigning/changing user card PIN (required for access mode 3)
* Read the first user card Enter old code # Enter new code# Enter new code#
Note:
The factory-set code "1234" does not open the door/wicket until it is changed to a new one.
4. Assigning/changing user fingerprint PIN (required for access mode 3)
* Input fingerprint Enter old code# Enter new code# Enter new code#
Note:
The factory-set code "1234" does not open the door/wicket until it is changed to a new one.
5. Changing the user's PIN code using the ID number
* ID number Enter old code# Enter new code# Enter new code#
Note:
The administrator must know the ID number before changing the user code, the new user code must not be factory code "1234".
6. Alarm deactivation
Read admin card or Read user card or Input user fingerprint or Press admin code#
