10
Note:
When the alarm is activated, users can disable the alarm in 3 ways: by reading the user card or scanning the fingerprint or entering the
administrator code.
7. Master code reset
Disconnect the power. Press the exit button (or short the yellow wire to black). Turn on the power while still holding the button. You will hear a beep,beep
twice, which will mean a successful reset of the master code.
Note:
After resetting the master code, the factory setting (code 999999) will be restored and the door opener and alarm activation times will be reset.
Modes of access
Opening by entering the PIN code (mode 1#):
Enter the user's PIN code and confirm with "#".
Opening by reading the card (mode 2#):
Put the proximity card or tag on
Opening by reading the card + entering the card's PIN / scanning the finge entering the fingerprint PIN (mode 3#):
Read the card or tag, then enter the card's PIN code and confirm with "#" / scan your fingerprint, then enter your fingerprint PIN code
Opening by reading the card, scanning the fingerprint or entering the PIN code (mode 4#):
Read the card or tag/scan your fingerprint / enter the user's PIN code and confirm with "#".
Opening by scanning the fingerprint (mode 5#):
Scan your fingerprint
Opening by scanning the finge card proximity (mode 6#):
Scan your fingerprint and then read the card or tag
Access by scanning finger cards proximity (mode 7#):
Scan another fingerprint and then read another card or tag
Sound and light indications
Operation status
Light indicator
Buzzer
Standby
Red light
-
Operation successful
Green light
Beeeeeeeep
Operation failed
Red indicator flash quickly
Beep-Beep-Beep
Enter programming mode
Red indicator flash slowly
Beep-Beep
Exit programming mode
Red light
Beeeeeeeep
Press digital key
Red indicator flash slowly
Beep
Press „*” key
Red indicator flash slowly
Beeeeeeep
Press access code
Red indicator flash slowly
-
Correct card reading
Red indicator flash slowly
-
Reading the cards of successive users (menus 32 2-10)
Red indicator flash slowly
-
Enter programming mode
Red indicator flash slowly
-
Enter setting mode
Orange light
-
Unlocking
Green light
Beep
Alarm
Red indicator flash quickly
Beep-Beep-Beep
Adding and deleting users
Adding a card or a fingerprint
* Admin code #
Factory setting: 999999
ID Number: od 1 do 9999
11
Read card or Scan fingerprint * *
Adding a card by entering its number
Enter the card number # Enter the card number # *
*
The card number can be 8
or 10 digits
Adding a card or a fingerprint by entering the
ID number
Press ID number # Read card or scan fingerprint * *
Adding a card by entering the ID number
and the card number
Press ID number # Enter the card number # Enter
the card number * *
The card number can be 8
or 10 digits
Adding the user code by entering the ID
number
Press ID number # Press the user cod # * *
Fingerprint assignment to card (max. 2 to
one card)
12
Read the user card Scan first fingerprint twice * *
Adding another cards
13
Press ID number # Enter the first card number #
Enter the number of cards * *
Deleting users
Deleting users
Deleting a card or a fingerprint
21
Read the card or Scan fingerprint * *
Deleting a card by entering its number
Enter card number # Enter card number * *
Deleting the card by entering the user ID
number
Press ID number # Press ID number * *
Delete all users
20
0000 # *
Access settings
Enter programming
Menu
Operation steps
Default settings
Access forbidden
* Admin code #
Factory setting: 999999
31
0 # *
4
Access by entering a PIN code
1 # *
Access by card proximity
2 # *
Access by proximity of the card + entering the card's PIN code or scanning the
finge entering the fingerprint PIN code
3 # *
