8
Turning on the Power
Set the power switch to < ON >
The LCD panel illuminates.
The charge lamp lights when the
wireless shooting (slave) is ready.
During wireless shooting,
press the button to fire a test flash.
Auto Power Off
To save battery power, the power will turn off automat-
ically after a time of idle use.To turn on the transmitter
again, press the cameras shutter buttonhalfway, or press
the test flash button.
Lock Function
By setting the power switch to < LOCK >, you can disable
all button and dial operations. Use this to prevent the
transmitter function settings from being accidentally
changed after you set them.
LCD Panel Illumination
When a button or dial is operated, the LCD panel
illuminates in green for 10 sec. When setting a function,
the illumination continues until the setting is complete.
NOTE:
1. Test Flash cannot be performed when the camera’s
delay timer is active.
2. When the menu option for shut-off is set to “ATSAVE“,
the transmitter settings are stored even when the
power is turned off.
