11
Use the following procedure to set the master units
transmission channel and wireless radio ID. Set the same
channel and ID for both the master unit and slave unit. For
the slave unit settings, see the flash’s instruction manual.
1. Display < MENU 3 >
Press function button 4 to display < MENU 3 >
2. Set a channel
< CH > press the function button, turn the dial is set to
“AUTO” or channel 1 to 15, and then press the set key to
return.
We recommend setting the ID to “0000” on all units, to
avoid complication with radio ID issues.
1. Press the function button 2 < ID >
Press “option 2” SEL “button to set the position, the
selected location marked with red. Then turn the dial
select Numbers from 0 to 9.
2. Repeat the above steps set 4 digit
3. Press the function button “HOME” or set button to
return to the ready state. When the connection is
established between main control unit and subordinate
unit, the LINK light with a green light.
About the < LINK > Lamp
The color of the < LINK > lamp changes depending on the
transmission status of the master unit and the slave unit
Radio ID
