2
IM0973112 A 03
IM0973112 A 03
3
Installation Manual
Camera AFZ Sst; Art. no. 0103481
Camera AFZ Sst RS485; Art. no. 0113481
Camera AFZ PAL HW; Art. no. 0103512
Camera AFZ PAL Serial; Art. no. 0103531
Camera AFZ PAL Serial RS485; Art. no. 0113531
Camera AFZ NTSC Serial; Art. no. 0103561
Camera AFZ NTSC Serial RS485; Art. no. 0113561
Safety
In order to guarantee safe operation, these safety instruc-
tions must be read before you start using this equipment.
• Do not open the enclosure. The camera is pressurised. This can cause
damage, short-circuiting or electrical shocks.
• Do not expose the equipment to extreme temperatures. This can cause
deformation of the enclosure or damage to internal components.
• Repairs or adjustments to the equipment may only be undertaken by
Orlaco.
• The equipment must be assembled as shown in this manual.
• If there have been alterations or changes to this equipment that have
not been specifically approved by Orlaco, use of this equipment is not
permitted.
Before you start using this equipment, please read this manual carefully
and follow all instructions. This installation manual describes the func-
tions of the equipment, outlines the connection options and explains how
to put the equipment into operation. We recommend that you keep this
manual in a safe place for reference purposes.
If you have any questions or issues concerning the operation of this
equipment, consult the relevant section in the manual or contact the
Orlaco Products BV Service department.
The camera and monitor systems from Orlaco comply with the latest CE,
ADR, EMC and mirror-directive regulations. All products are manufac-
tured in accordance with the ISO 9001 quality management, ISO/TS16949
quality automotive and ISO 14001 environmental management.
Contents
Page
1.
Introduction
3
2.
Mounting
3
3.
Operation
3
3.1.
Overpressure in the enclosure
3
3.2.
Valve
3
3.3.
Switching on and off
3
4.
Electrical installation
4
4.1.
Camera
4
4.2.
Supplied cable
4
4.3.
Camera
5
5
Technical specifications
6
6.
Dimensions
7
7.
Pelco-D commands
8
8.
Jittter
10
9.
Maintenance and cleaning
10
10.
Disposal
10
11.
General terms and conditions
11
12.
Release notes
11
Installation Manual
Available documentation
DS0103481 Camera AFZ Sst (0113481)
DS0961301-0103512 Camera AFZ PAL HW
DS0103531 Camera AFZ PAL Serial (0113531)
DS0103561 Camera AFZ NTSC Serial (0113561)
Art. no.
0103531/0113531/0103561/0113561
Art. no. 0103481/0113481
Art. no. 0103512
1. Introduction
These Auto Focus Zoom (AFZ) cameras have excellent specification
properties for maximum performance on the different workstations, such
as cranes, emergency vehicles, vessels and military vehicles.
2. Mounting
A camera bracket is supplied with the Camera AFZ Alu/Sst; the package
includes the necessary nuts, bolts and washers.
Use of a different type of bracket or bracket made by a different
manufacturer is not permitted.
This bracket is suitable for mounting the camera in hanging, standing and
overhead positions, see figure 1. Use a Allen key to adjust the bracket to
the camera with M6 socket head cap screws. Use a 13-mm open-ended
spanner to secure the camera bracket with four M8 bolts, nuts and wash-
ers. See figure 2.
3. Operation
3.1. Overpressure in the enclosure
The enclosure of the Camera AFZ is with dry-nitrogen filled and has a 1,4
Bar overpressure, therefore IP68 according to IEC 60529 (25 m under
water).
3.2. Valve
WARNING:
Do not open the enclosure.
The enclosure is protected by static pressurisation (Nitrogen).
The enclosure shall be filled only by the manu-facturer.
The filling valve, may
ONLY
be used by the manufacturer.
Do not remove
the blue seal.
See figure 3
A
.
The warranty expires when the blue seal
is broken!
The warranty expires when the user does not act according the
instructions.
If the pressure is lost send the device back to the manufacturer for inves-
tigation, repair and testing.
3.3. Switching on and off
The Camera AFZ Alu/SSt is switched on by connecting the connector
cables to the power supply. It is switched off by disconnecting the Power
cable from the power supply. Under normal circumstances, the system
starts once the power is 24V/DC+/-10%.
Ensure that all parts are firmly fixed, stable and secure.
Figure 2
Figure 3
M8
M6
Attention:
Always use the
Isolation manchets
Figure 1
Filling valve
with blue seal
UNITS IN MM
Indicatie light
(red)
Camera ON
Indicatie light
(green)
Heating ON
(Demister 2 heater)
122,0
96,0
13,0
80,0
74,9
7,7
40,0
14,7
R4,5 +0,5 -0,0
∅
10,0
122,0
141,5
109,0
140,2
260,0
122,0
141,5
A
A
Bracket overhead
Bracket standing
Bracket hanging