OWN ER'S MAN UAL- 10
Tri-Mode Six Channel Configuration
•
Lowest recommended impedance is 2
Ω
stereo and 4
Ω
bridged
mono.
•
Front and rear outputs must be set for full range operation.
•
Passive crossovers must be used on all components and frequencies
must not overlap.
WARNING!
Failure to observe these requirements may result in
damage to the amplifier
Figure 5
Figure 5
NOTE:
To get full output in this configuration, band limiting filters as
shown in this diagram may need to be used to prevent the impedance
from dropping too low and engaging protection circuits.
XTR500.4,XTR750.4 and XTR1000.4
XTR1700.4 and XTR2500.4
